MiKi 2 UV-C air cleaner, wall installation

UV-C air purifier MiKi 2 for wall mounting

The UV-C air purifier MiKi receives an update with version 2. Added are a function display including sensor and display for a pending lamp replacement, a changed insertion of the connection cable (new: on the opposite side to the switch), an improved fan (air flow rate 78 m³/h instead of 70 m³/h) and a further reduced noise level (32 dB instead of 38 dB).

The MiKi 2 air purifier (short for "micro-organism killer"), which is intended for wall mounting, is visually unobtrusive and functionally convincing. The device, produced by LI-EX in Germany, neutralises 99.9% of viruses and bacteria, effectively reducing the risk of spreading infectious diseases such as flu or colds via aerosols in the room air.

The white aluminium housing houses two low-noise fans for drawing in and expelling the air, as well as a special UVC lamp for air disinfection. The ultraviolet light of the lamp remains inside the unit and no ozone is produced. This makes MiKi 2 suitable for use in all dry rooms where people or even pets are present. This ranges from private living areas to public environments, such as educational, care and nursing facilities, medical practices and clinics, offices and administration, hair and beauty salons.

- Neutralization of pathogens by means of UVC light

- UVC lamp: 55 W, wavelength 253.7 nm, replacement recommended after 8,000 h of operation (replacement lamps available separately)

- Total power: 65 W

- LED status display: blue for trouble-free operation, red when the lamp is due to be replaced within the next 500 operating hours and flashing red in the event of a defect or when the lamp has exceeded its service life.

- for wall mounting; delivery includes bracket

- alternative mounting methods possible; mounting accessories available separately

- blue LEDs indicate operation

- 230 V connection with plug cable

- Cleaning of 78 m³ air per hour

- Very quiet operation: max. 32 dB

- Made in Germany

Notes:

- For best effectiveness, the device should be placed at about head height.

- During the first 1 to 2 hours of operation, a metallic smell may occur; this is due to the manufacturing process and is harmless to health.