Theben thePiccola S360-100 DE motion sensor, white

Passive infrared motion detector thePiccola S360-100 EN for installation in the ceiling

With a detection angle of 360°, thePiccola S360-100 DE passive infrared motion detector covers a detection area of approx. 50 m² with a radius of 8 m. It enables automatic presence and brightness-dependent lighting control. It enables automatic, presence and brightness-dependent lighting control. The ceiling opening should have a diameter of 34 to 36 mm. The detector is operated fully automatically, is preset and thus immediately ready for operation. Test operation is possible to check the function and detection range. The following remote controls are suitable for controlling the detector: User remote control the Senda S, Service remote control theSenda P, App remote control the Senda B. They must be ordered separately if required (see Accessories).

- Mounting height: 2 to 6 m

- Brightness setting range: 5 to 1,000 lux

- Brightness switching value adjustable, teach-in function

- Pulse function for staircase lighting timer

- Light run-on time adjustable: (pulse 0.5 s), 30 s to 30 min

- Mixed light measurement suitable for fluorescent lamps (F/PL/ESL), halogen/incandescent lamps and LEDs

- Incandescent/halogen lamp load: 2,000 W

- Fluorescent lamp load (VVG) not compensated: 2,000 VA

- Fluorescent lamp load (VVG) parallel compensated: 1,300 VA 140 µF

- Fluorescent lamp load (VVG) series-compensated: 2,000 VA

- Fluorescent lamp load (EVG): 1,200 W

- LED lamp < 2 W: 55 W

- LED lamp > 2 W: 600 W

- Channel A light: relay, 230 V

- Extension of the detection range by master/slave switching

- Ambient temperature: - 20 °C to + 50 °C

- Protection class IP44 (sensor), IP20 (power unit)